The Effectiveness of Utilizing the Fabric Order Information System at PT Ateja Tritunggal Using the PIECES Method

##plugins.themes.bootstrap3.article.main##

Kurniawan Kurniawan

Abstract

The development of information technology has brought significant impacts to the business world, including the manufacturing industry. One important aspect in the textile industry is the production of fabric orders. PT Ateja Tritunggal also faces challenges in managing the fabric order information system. The PIECES (Performance, Information, Economy, Control, Efficiency, and Service) method framework is a framework used for classifying problems, opportunities, and directions within the scope of system analysis and design definitions. This study aims to analyze the effectiveness of fabric order production at PT Ateja Tritunggal using the PIECES method. This research uses quantitative methods and data collection techniques through a survey using questionnaires conducted using Google Forms media to all personnel in the PPIC (Planning Product Inventory Control) department at PT Ateja Tritunggal. The test results showed that the information system running at PT Ateja Tritunggal falls into the good category, but there is a need for improvement so that all business processes can run more effectively and properly.

##plugins.themes.bootstrap3.article.details##

How to Cite
[1]
K. Kurniawan, “The Effectiveness of Utilizing the Fabric Order Information System at PT Ateja Tritunggal Using the PIECES Method”, coreid, vol. 2, no. 1, pp. 11–19, Mar. 2024.


Section
Articles

References

X. Chen and X. Shu, “The Scientific and Technological Innovation Performance of Chinese World-Class Universities and its Influencing Factors,” IEEE Access, vol. 9, pp. 84639–84650, 2021, doi: 10.1109/ACCESS.2021.3087659.

R. Yuliana and B. Rahardjo, “Agile Data Architecture in Mining Industry for Continuously Business-IT Alignment: EA Perspective,” Jurnal Online Informatika, vol. 3, no. 1, p. 48, 2018, doi: 10.15575/join.v3i1.213.

Y. Guo, N. Wang, Z.-Y. Xu, and K. Wu, “The internet of things-based decision support system for information processing in intelligent manufacturing using data mining technology,” Mech Syst Signal Process, vol. 142, p. 106630, 2020.

G. S. Kearns and R. Sabherwal, “Strategic Alignment Between Business and Information Technology: A Knowledge-Based View of Behaviors, Outcome, and Consequences,” Journal of Management Information Systems, vol. 23, no. 3, pp. 129–162, 2006, doi: 10.2753/MIS0742-1222230306.

A. Sani, A. Budiyantara, T. Haryanto, N. Wiliani, K. Manaf, and E. Firmansyah, “Influences of the Environmental Context on the Acceptance and Adoption Technology among SMEs in Indonesia,” Test Engineering & Management, vol. 83, pp. 22283–22293, 2020.

M. Irfan, J. P. Syopiansyah, and A. R. Muhammad, “The Readiness Model of Information Technology Implementation among Universities in Indonesia,” IOP Conf Ser Mater Sci Eng, 2018.

A. J. Fernandes, H. Hartono, and C. Aziza, “Assessment IT governance of human resources information system using COBIT 5,” International Journal of Open Information Technologies, vol. 8, no. 4, pp. 59–63, 2020.

M. J. Mcgee and M. J. Mcgee, “Information Technology Management Strategies to Implement Knowledge Management Systems This is to certify that the doctoral study by,” 2017.

R. S. Perdana, “Audit Keamanan Sistem Informasi Akademik Menggunakan Framework NIST SP 800-26 (Studi Kasus: Universitas Sangga Buana YPKP Bandung),” Infotronik: Jurnal Teknologi Informasi dan Elektronika, vol. 3, no. 1, pp. 9–14, 2018.

E. Vasile and D.-O. SIMION, “THE ROLE OF INFORMATION SYSTEMS IN ECONOMIC ORGANIZATIONS FOR THE STRATEGIC MANAGEMENT.,” Internal Auditing & Risk Management, vol. 14, no. 2, 2019.

S. S. Hussein et al., “Towards designing an EA readiness instrument: A systematic review,” Colloquium in Information Science and Technology, CIST, pp. 158–163, 2017, doi: 10.1109/CIST.2016.7805034.

A. S. Aydiner, E. Tatoglu, E. Bayraktar, S. Zaim, and D. Delen, “Business analytics and firm performance: The mediating role of business process performance,” J Bus Res, vol. 96, pp. 228–237, 2019.

G. Kiradoo, “A Study on Management Information Systems Role and Adoption in Managerial Decision Making,” International Journal of Management (IJM), vol. 11, no. 3, 2020.

H. Hanafiah, “Perencanaan Strategis Sistem Infomasi Dan Teknologi Informasi (SI/TI) Perpustakaan Di SMA Negeri Satu Baleendah,” J-SIKA| Jurnal Sistem Informasi Karya Anak Bangsa, vol. 2, no. 01, pp. 34–41, 2020.

N. M. B. Aditya and J. N. U. Jaya, “Penerapan Metode PIECES Framework Pada Tingkat Kepuasan Sistem Informasi Layanan Aplikasi Myindihome,” Jurnal Sistem Komputer dan Informatika (JSON), vol. 3, no. 3, pp. 325–332, 2022.

B. Subaeki, A. A. Rahman, S. J. Putra, and C. N. Alam, “Success model for measuring information system implementation: Literature review,” in Journal of Physics: Conference Series, IOP Publishing, 2019, p. 077015.

D. W. T. Putra, H. Bulkis, P. Mandarani, and A. Syahrani, “Metode Pieces Dalam Mengukur Tingkat Kepuasan Pengguna Portal Akademik,” J. Sains dan Teknol. J. Keilmuan dan Apl. Teknol. Ind, vol. 21, no. 1, p. 50, 2021.

R. Al Hakim, I. Mustika, and W. Yuliani, “Validitas dan reliabilitas angket motivasi berprestasi,” FOKUS (Kajian Bimbingan & Konseling Dalam Pendidikan), vol. 4, no. 4, pp. 263–268, 2021.

A. E. Pratiwi and S. Susanti, “Evaluasi Kinerja Sistem Informasi Akuntansi Accurate Accounting Enterprise Menggunakan Metode Pieces,” Jurnal Responsif: Riset Sains Dan Informatika, vol. 3, no. 1, pp. 63–74, 2021.